Tubular Membrane Module PVDF UF Membrane for Landfill Leachate/30nm/4inch/8inch/ Cross Refer: Berghof Membranes

• Membrane Type: Tubular
• Type: UF
• Module Od: 4inch
• Tube ID: 8mm
• Module Length: 3000mm
• Shell Material: FRP
• Model NO.: TG-30nm-8430
• Mwco: 30nm
• Transport Package: Wooden Box
• Specification: 8430
• Trademark: RisingSun
• Origin: China
• HS Code: 84219990
• Production Capacity: 400piece/Month

Product Description

Wastewater treatment landfill leachate

Leachate from landfills and incinerators arises mainly because rainwater penetrates the stored waste, but also from leakage of the garbage. The polluted leachate is collected by the garbage dump and undergoes special wastewater treatment.
The wastewater from landfills is characterized by a high variety of waste.

Tubular membranes are particularly suited to liquid with high viscosity or suspended solids, because their wide flow paths make them highly resistant to clogging. Tubular membranes system is an external and separated filtration system. For high solid content and viscosity liquid, we use adjustable cross-flow velocity to make the membrane run under optimal conditions and extend membrane service life. At the same time, it has more convenient cleaning, maintenance, and operation under closed pipeline.

SUN^® Tubular membranes use a cross-flow filtration technology. The cross-flow filtration can reduce cleaning times and downtime, so as to maintain a high flow rate. Some membranes are available for back washing, if necessary, you can also use permeate or chemical cleaner for back washing, effectively extend the membranes working life.



Decoding of SUN® Tubular Membranes Model


 What Membrane Sheet We Have? 

  Hydrophilic membrane sheet specifications:

Parameter	Unit	Membrane Material
		PVDF		PAN	PES
Pore size/MWCO	nm/Dalton	100,000	30nm	50,000	0.1μm	100,000	50,000	10,000	5,000
Clean Water Flux	LMH, 100kpa	>800	>800	>150	>600	>350	>200	>25	>15
Operation Pressure	Kpa	-20~800			-20~800
Max.Operation Temperature	ºC	60			60
pH Range		2~12			2~12
Chloringe Exposure	ppm.h	250,000			250,000

Note: Membrane inner tube diameter is 5-12.7mm; Superior fouling resistance; Higher sustainable flux; Easier cleaning;
Strong negative pressure resistance.
Maximum operating pressure up to 10bar, Working life up to more than 5 years.

SUN^® Tubular Membranes / an external MBR for Landfill Leachate 

The external tubular membrane system is a kind of process mainly for high concentration wastewater treatment,
especially for landfill leachate. It is composed of biochemical process and external tubular UF membrane system.
Pollutants such as organic matter will be removed through biochemical process and the sludge and water will be
separated through the external tubular UF membranes, so as to get high quality ultrafiltration water, and the
concentrated water will return to the biochemical tank. The designed flux is up to 70~120LMH, and the filtration
accuracy can reach 0.03um. The 8mm diameter channel can effectively retain the sludge without causing membrane
fouling. The maximum sludge concentration can up to 40mg/l.

RisingSun Tubular UF membranes, 30nm, PVDF for landfill leachate, cross replacement Berghof membranes.
Use of RisingSun Membranes tubular UF filtration ensures complete solids retention, efficient system operation and process stability at all times.

External crossflow filtration technology is a good choice for :
Superior Effluent Quality
Increased Treatment Capacity
Smaller Footprint
Low Sludge Production



The combination of the tubular UF membrane system with RO or NF can make the landfill leachate effluent 
meet China government level 1 & level 2 discharge standards.
 

Specifications:
Model	Tube ID.  (mm)		Module OD. (inch)		Module Length (mm)	Membrane Area (m2)		Clean Water Flux @100kpa(T/H)
TG-30nm-8410	8.0		4.0		1000	2.1		1.68
TG-30nm-8430	8.0		4.0		3000	6.4		5.12
TG-30nm-8630	8.0		6.0		3000	15.2		12.16
TG-30nm-8830	8.0		8.0		3000	27.2		21.16
TG-30nm-81040	8.0		10.0		4000	53.4		42.72
We can offer customized membrane module, especially for small size pilot modules.

 

Membrane Module: TG-30nm-8830, Operation Parameters (an example)
Working principle	cross filtration	Flux per module	1.9t/h
Operation pressure	5 bar/5 modules	Chemical cleaning frequency	1-2 month
Flux rate	70 LMH	Pressure drop.	0.8 bar

 

Reference of selection tubular membranes in the field of landfill leachate
Daily Capacity Q (m³/d)	Q≤50	50≤Q≤120	120≤Q≤250	250≤Q≤400	300≤Q≤450
Module size	4inch diameter, 3 meter length	6inch diameter, 3 meter length	8inch diameter, 3 or 4 meter length	10inch diameter, 3 meter length	10inch diameter, 4 meter length
Module qty.	3-6 pcs	3-6 pcs	4-6 pcs	4-6 pcs	4-6 pcs

SUN^® On Site Application Pictures



Applications:
Difficult waste water fields:
Landfill leachate pretreatment
Pretreatment for alkali liquor recycle
Special chemical waste water (Coking, Tannery, textile, wood pulp bleach) treatment
Return injection of produced water from oil field
Emulsified oil treatment

Cross Replacement: Berghof membranes

FAQ
 1, Q: Are you manufacturer?
     A:Yes, definitely,our factory locate in Beijing,China.
 
 2, Q:What's your main products ?
     A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,
STRO,E-coat UF membrane, anode cell etc.
 
 3, Q: what's your main market?
     A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
 
4, Q:Can you supply free sample?
    A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
 
5, Q: What about the package?
    A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than 1%.
 
6, Q: Do you offer OEM?
    A: Sure!