Sanitary RO membrane for concentration of low MW organics 8-inch diameter 38-inch length

• Membrane Type: Spiral
• Type: RO
• Membrane Sheet: Special Composite Membrane Material
• Feed Spacer: 30mil
• Application: Concentration of low MW organics
• Cross Replacement: KOCH HRX30 8038
• Model NO.: SS-RO1-8038-F1
• Transport Package: Carton/Pallet
• Specification: 8038
• Trademark: RisingSun
• Origin: China
• HS Code: 84219990
• Production Capacity: 800piece / Month

Product Description

Model: SS-RO1-8038-F1

Decoding of our products codes: RO1-8038-F1

Configuration	Outer Wrap	Membrane Type	Size	Feed Spacer
Spiral	SANITARY	RO1	2319 2.3"×19"	A=13mil	F=31mil
			2540 2.5"×40"	B=17mil	G=46mil
			4040 3.9"×40"	C=20mil	H=65mil
			8040 7.9"× 40"	D=26mil	I=80mil
			8038 8.0"× 38"	E=28mil	J=120mil
			...	1=Diamond	2=Parallel

 

Product Parameters

 

Model	A		B		C
SS-RO1-8038-F1	inches	(mm)	inches	(mm)	inches	(mm)
	38.0	(965)	7.9	(201)	1.125	(28.6)

We offer different dimensions, such as 1812/2520/2540/4040/8038/8040 etc. Our membrane module has a compact design and an optimum surface area to volume ratio. The feed channel height can be varied by the thickness of the feed spacer material (from 13 to 120 mil). This design feature leads to excellent hydrodynamics in combination with low energy demand.

 

SPECIFICATION:

Model	Effective Area		Flow Rate		Average Salt Rejection		Minimum Salt Rejection
SS-RO1-8038-F1	371 ft2  (34.5m2)		9,700 gpd		99.5%		98.5%

Performance is based on the following test conditions:2000ppm NaCl, 225psi, 25°C,15% recovery, pH8, 30 minutes operation


OPERATION SPECIFICATIONS:

Typical Operating Pressure:	300-600 psi (20.7-41.4 bar)
Maximum Operating Pressure:	800 psi (55 bar)
Typical Operating Temperature Range:	40 - 122°F (5 - 50°C)
CIP Temperature Range:	113°F (45ºC)-pH:1.8-11.2
	140°F (60ºC)-pH:1.8-11
Maximum CIP Pressure	15 - 75 psig (1 - 5 bar)
Allowable pH-Continuous Operation @25ºC:	2.0-11.0
Maximum Feed Flow:	80GPM
Design Pressure Drop Per Element:	6 - 10 psi (0.4 - 0.7 bar)
Design Pressure Drop per Vessel:	30 - 50 psi (2.1 - 3.4 bar)
Hydrogen peroxide usage limit:	Short-term cleaning (@ 25°C maximum): 1000PPM dechlorination recommended

Main application:

Concentration of low MW organics and UF permeate. Polishing of RO permeate and evaporator condensate.

 

Product Photo

 

 

Our Team

 

 

FAQ

 

 1, Q: Are you manufacturer?
     A:Yes, definitely,our factory locate in Beijing,China.
 
 2, Q:What's your main products ?

     A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,
STRO,E-coat UF membrane, anode cell etc.
 
 3, Q: what's your main market?
     A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
 
4, Q:Can you supply free sample?
    A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
 
5, Q: What about the package?
    A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than
       1%.
 
6, Q: Do you offer OEM?
    A: Sure!