Disc. Tube RO Membrane Module

• Customization: Available
• Membrane Type: Disc Tube
• Type: RO
• Model NO.: DTRO3-8042
• Operation Pressure: 75bar
• Membrane Area: >9.4 Square Meter
• Min. Rejection: 97.5%
• Membrane Sheet: The Best in The World
• Cross Replacement: Rochem, Rotreat, Pall
• Transport Package: Wooden Box
• Trademark: RisingSun
• Origin: China
• HS Code: 84212990
• Production Capacity: 300piece/Month

Product Description

RisingSun Membrane's Disc. Tube membrane module includes RO and NF by using different kinds of membrane sheet. The membrane module structure is completed distinct from the traditional spiral wound membrane. With open flow channels, feed flows through the entrance into the pressure vessel and reach the disc in a short distance. Then the feed flows 180 degrees from one side of the membrane reverse flow into the other side of the membrane, into the next disc again and finally runoff from outlet.


 

This special design makes feed collide with the disc bulge through the membrane surface forming turbulence which increases flow rate and self-cleaning function and long service life of the membrane.

Features:

• High strength design, up to 160bar operation pressure
• Simple pre-filtration
• Open channel configuration enables low flow resistance and low concentration polarization, Minimize membrane scaling and fouling
• Easy to maintain
• High rejection and high recovery rates with low energy costs (up to 99.6%)
• Long membrane life
• Lower membrane replacement costs
• High quality product water

Application fields:

• Treatment & re-use of landfill leachate 
• High concentration of industrial waste water
• Effluent & waste water treatment from API, formulation plant & combined effluent from pharmaceuticals industry
• Effluent treatment from textile industry and dyeing unit
• Picking & oily waste treatment in steel industry
• Metal recovery waste recycling
• Traditional spiral RO / NF concentrate treatment 
• High COD/BOD waste water treatment (max. COD 20,000ppm)

Our advantages:

1. Cost is competitive and fast lead time.
2. Cross reference: Rochem DT module and PF module
3. Cross reference: Rotreat RCDT module

A typical process diagram:






75bar High pressure membrane module specification:
 

Items	High pressure (75bar)
Model	SP-DTRO3-8042
Membrane sheet	Composite Polyamide (RO3)
Membrane cushion qty. (pc)	209
Stable rejection**	98.5%
Min.  Rejection (%)	97.5%
Membrane effective area (m^2)	>9.4
Feed flux** (l/h)	420
Permeate flux range (l/h)	8-40
Hydraulic disc material	ABS
Vessel material	FRP
Operation pressure (bar)	75
Max. TMP (bar)	9
Max. operation temperature (ºC)	40
Chlorine tolerance (ppm)	<0.1
Recommended operation pH	3-11
Chemical cleaning  pH@40ºC	2-12

** RO3 test condition: 2,000mg/l NaCl solution at 15.5bar applied pressure, 25ºC; RO5 test condition: 32,000mg/l NaCl solution at 55bar applied pressure, 25ºC; NF2 test condition: 2,000mg/l MgSO4 solution at 7bar, 25ºC. Permeate flux and stable rejection may vary based on inlet water condition. There may have about ±20% change for individual module permeate flux.



 

Operation Pressure (bar)	75 bar
Total module length A (mm)	1400
Vessel length B (mm)	1150
Module diameter C (mm)	216
Vessel to top of frame D (mm)	98
Inlet to flange center distance E (mm)	76
Outlet to flange center distance F (mm)	56
Inlet & outlet connections diameter (mm)	12
Permeate connection (mm)	1 x  G3/8"-90° elbow for 9mm  hose

DTRO / DTNF membrane module structure



 

Item	Name	Item	Name	Item	Name	Item	Name
1	Tie rod	7	End flange	13	O-ring 14-2	19	Reinforced top flange
2	Thick nut	8	Screwing tie rod	14	O-ring 52-4	20	Membrane vessel
3	Top flange	9	Tie rod gasket	15	O-ring 48-2	21	Reinforced rod
4	Distance fitting	10	Thin nut	16	Membrane cushion	22	Reinforced end flange
5	Hydraulic disc	11	Inlet/Outlet connection	17	O-ring 39-3	23	Reinforced nut
6	Lip seal	12	Permeate connector	18	Screwing tie rod

FAQ

1, Are you manufacturer? Yes, definitely,our factories locate in Beijing, China.
2, What's your main products ? We manufacture filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,STRO,E-coat UF membrane, anode cell etc.
3, How do you guarantee your membrane filter performance? We use high quality membrane sheet from USA, high flux, high chemical resistance, Precise MWCO.
4, What's your main market? There're about 94 countries we've been exported, mainly in USA, Korea, UK, Italy, Russia, Germany, India, Spain, Brazil, South Africa, Malaysia etc.
5, What brands of membrane products can you do cross-replacement? DOW (Dupont), Koch, GE(Suez), Synder, Parker, Microdyn-Nadir, Rochem(Nanostone), Pall, Bergof, Porex, Toray ect.
6, Do you offer OEM? Sure!