NF membranes have a molecular weight cut-off between 150-2000 Dalton usually.
RisingSun Membrane manufacture spiral type membrane with glassfiber outer, which is the best choice for water treatment.
Model: SG-UX001-8040 (Cross refer: G-Series GE family of proprietary thin-film ultra-filtration membrane elements is characterized by a molecular weight cutoff of 1,000)
Product Description:
| Membrane Chemistry: |
Special Composite Membrane Material |
| Membrane MWCO |
1,000 Daltons |
| Construction: |
Spiral wound element with glassfiber outer |
| Feed Spacer: |
F=31 mil, G=46 mil, H=65 mil, I=80 mil |
SPECIFICATION:
| Model |
Effective Area |
Flow Rate |
Average Salt
Rejection Range |
| SG-UX001-8040-F |
370 ft2 |
5,400 gpd |
80%-95% |
| SG-UX001-8040-G |
270 ft2 |
3,900 gpd |
80%-95% |
| SG-UX001-8040-H |
210 ft2 |
3,000 gpd |
80%-95% |
| SG-UX001-8040-I |
189 ft2 |
2,750 gpd |
80%-95% |
Rejection test conditions:2,000ppm MgSO4, 145.0psi, 25°C, pH8.0, 15% recovery, 30 minutes operation.
Flow rate test conditions: Pure water base on above conditions. Flow rate for individual element may vary +/-25%
OPERATION SPECIFICATIONS:
| Typical Operating Pressure: |
40-290 psi (3.0-20.0 bar) |
| Maximum Operating Pressure: |
600 psi (41 bar) |
| Operating Temperature Range: |
35-131°F (2-45ºC) |
| Cleaning Temperature Range: |
113-131°F (45-55ºC) |
| Allowable pH-Continuous Operation @25ºC: |
2.0-11.0 |
| Allowable pH-CIP @25ºC: |
1.8-11.5 |
| Chlorine Tolerance: |
<0.1 ppm |
| Maximum Feed Flow: |
80 GPM (F);110 GPM(G);128 GPM (H);145 GPM(I) |
| Maximum Pressure Drop: |
13 psi (0.9 bar) |
| Minimum Brine Flow/Permeate Flow Ratio |
5:1 |
| Maximum SDI ( 15 minutes): |
5 |
| Maximum Turbidity |
2 NTU |
8040 drawing
| Model |
A |
B |
C |
| SG-UX001-8040 |
inches |
(mm) |
inches |
(mm) |
inches |
(mm) |
| 40.0 |
(1016) |
7.9 |
(201) |
1.125 |
(28.6) |
Main application:
Surface water pretreat-ment, color/TOC reduction, and chemical purification.
Spiral Membrane Element Configuration:
FAQ
1, Q: Are you manufacturer?
A:Yes, definitely,our factory locate in Beijing,China.
2, Q:What's your main products ?
A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,
STRO,E-coat UF membrane, anode cell etc.
3, Q: what's your main market?
A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
4, Q:Can you supply free sample?
A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
5, Q: What about the package?
A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than
1%.
6, Q: Do you offer OEM?
A: Sure!
Our Team
Audited Supplier 
8040 drawing
){kind=link}