Customization: | Available |
---|---|
Membrane Type: | Spiral |
Type: | NF |
Still deciding? Get samples of US$ 800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Membrane Chemistry: | Special Composite Membrane Material | |||||
Membrane MWCO | 1,000 Daltons | |||||
Construction: | Spiral wound element with glassfiber outer | |||||
Feed Spacer: | F=31 mil, G=46 mil, H=65 mil, I=80 mil |
Model | Effective Area |
Flow Rate |
Average Rejection |
Minimum Rejection |
||||
SG-UE001-8040-F | 370 ft2 | 7,600 gpd | 80% | 70% | ||||
SG-UE001-8040-G | 270 ft2 | 5,500 gpd | 80% | 70% | ||||
SG-UE001-8040-H | 210 ft2 | 4,500 gpd | 80% | 70% | ||||
SG-UE001-8040-I | 189 ft2 | 3,900 gpd | 80% | 70% |
Typical Operating Pressure: | 40-290 psi (3.0-20.0 bar) | ||||||||
Maximum Operating Pressure: | 600 psi (41 bar) | ||||||||
Operating Temperature Range: | 35-131°F (2-45ºC) | ||||||||
Cleaning Temperature Range: | 113-131°F (45-55ºC) | ||||||||
Allowable pH-Continuous Operation @25ºC: | 2.0-11.0 | ||||||||
Allowable pH-CIP @25ºC: | 1.8-11.5 | ||||||||
Chlorine Tolerance: | <0.1 ppm | ||||||||
Maximum Feed Flow: | 80 GPM (F);110 GPM(G);128 GPM (H);145 GPM(I) | ||||||||
Maximum Pressure Drop: | 13 psi (0.9 bar) | ||||||||
Minimum Brine Flow/Permeate Flow Ratio | 5:1 | ||||||||
Maximum SDI ( 15 minutes): | 5 | ||||||||
Maximum Turbidity | 2 NTU |
Model | A | B | C | |||
SG-UE001-8040 | inches | (mm) | inches | (mm) | inches | (mm) |
40.0 | (1016) | 7.9 | (201) | 1.125 | (28.6) |