Anion exchange membrane from USA for Anode E-coat process AMI-7001 / MA3475 / MA-7500

• Customization: Available
• Type: Ionite membrane
• Functionality: Anion Exchange Membrane
• Model NO.: AE3
• Standard Width: 48inch
• Chemical Stability Range (pH): 1-10
• Functional Group: Quaternary Ammonium
• Transport Package: Carton Box
• Trademark: Customized
• Origin: America
• HS Code: 39219090

Product Description

Anion exchange membrane from USA for Anode E-coat process AMI-7001 / MA3475 / MA-7500

We supply both Anion and Cation exchange membrane for electrocoat process and water treatment industries. Nowadays, anion exchange membrane is popular used for most of CED systems, which is approved by PPG, Dupont, Valspar, Kansai and many other electrocoat paint systems. Moreover, our ion exchange membranes can be used in electro deionization systems for the production of ultra-pure water. We have three types of anion exchange membrane sheet, please see below table for the detail:

 

PRODUCTS SPECIFICATION
Ion Exchange Membrane Model	Membrane Character	Functional Group	Exchange Capacity meq/g	Replacement Reference		Typical Application
				Brand	Model
AE1	Anion	Quaternary Ammonium	1.0±0.1	MI	AMI-7001	The anode & cathode electrocoating process; EDI, etc.
AE2			0.9	LANXESS SYBRON	IONAC MA-3475
AE3			1.0		IONAC MA-7500
CE1	Cation	Sulfonic Acids	1.6±0.1	MI	CMI-7000
CE2			1.4	LANXESS SYBRON	IONAC MC-3470

 

ANION EXCHANGE FLAT SHEET MEMBRANE Model:AE3
Physical and Chemical Properties			U.S. Units		Metric Units
Functional group			quaternary amine		quaternary amine
Exchange capacity	min.			meq/g	1.0
Current density	max.	ampere/ft2	50	ampere/m2	538
Area resistance	ohm/cm	0.1 N NaCl	30	0.1 N NaCl	30
		1.0 N NaCl	10	1.0 N NaCl	10
Permeslectivity	0.5 N NaCl /1.0 N NaCl		99		99
Water permeability @5 psi	max.	ml / hr / ft2	50	ml / hr / m2	538
Mullen burst test	min.	psi	150	bar	10.3
Stability	pH range		1-10		1-10
Stability	max.temp	°F	176	ºC	80
Dimensions	max.width	inches	43	meters	1.09
Dimensions	max. length	feet	98.4	meters	30
Dimensions	approx. thickness	mils	20	mm	0.51
Ionic form as shipped			Cl-		Cl-
Storability	of products	max.years	2	max.years	2
Storability	temp range	°F	40-75	ºC	4-24

Flat Sheet Membrane Samples for Feasibility Tests
Membrane Preparation
   This ion exchange membranes are furnished dry for ease of storage.  The membranes should remain in the shipping canister in a dry environment until ready for use.  Membranes should be prepared for service by either of the two methods listed below.
Method A -  The membranes should be completely immersed in a solution similar in composition to the liquid contacting the membrane in process.  It is preferable that the liquid temperature be no greater than 131 °F
(55 ºC).  Allow a contact time of 3 - 4 hours.
Method B -  As an alternative to equilibrating in the application liquor, the membrane can be immersed in water or brine solution under the same temperature and time conditions listed in Method A.
Safety Precautions: 
  Strong oxidants, e.g. nitric acid, can cause violent reactions when in contact with ion exchange resins.
Storage: 
  It is recommended to store ion exchange resins at temperatures above the freezing point of water. Ion exchange membrane should not be stored in direct sunlight.  If the resin should become frozen, the membrane should be left to thaw out at ambient temperature before handling.  No attempt should be made to accelerate the thawing process.

Applications:
Electrodeionization for ultrapure water in EDI and SWEDI systems
Electrocoating for Cathodic paint systems
Electrolysis for Biological Fuel Cells
Electrodialysis for desalination and demineralization
Electroplating for metal recovery


OUR TEAM
  
FAQ
 

1. Q: What does your company specialize in?
    A: We are a leading manufacturer of filter membrane products, based in Beijing, China, with over a decade of experience.

2. Q: What types of filter membrane products do you offer?
    A: We offer MF, UF, NF & RO membranes ; A perfect cross replacement ( Dupont, Koch, Suez, Pentair, Berghof, Rochem) in high quality but economic cost and easy cooperation; External MBR (Tubular membrane), Flat MBR, spiral MBR, DTRO, STRO devoting to landfill leachate, ZLD, high salt water etc; Tubular Anode cell & Spiral UF Membrane products for the E-coat /electrocoating/ KTL/CED/electro deposition industry.

3. Q: Can you customize membrane products?
    A: Yes, we offer OEM service.

4. Q: What is the typical lead time for order fulfillment?
    A: Usually 2-3 weeks

5. Q: What is payment methods do you accepts?
    A: We prefer T/T.

6. Q: What kind of logistics do you have?
    A: FedEx / DHL / By air / By Sea.

7. Q: Can you supply free sample?
     A:Yes, we can supply free samples, the freight charge should be on your side.

 

8. Q: Where are your customers located?
     A: Till 2023, Our clients in 94 countries worldwide, mainly in USA, Korea, UK, France, Russia, Germany, Czech, India, Spain, Brazil etc.