Tubular UF Membrane Modules 120KD analog FEG PLUS 10-HFP-276-PVI for Industrial Applications

• Membrane Type: Tubular
• Type: UF
• Module OD: 1.5 inch
• Tube ID: 25 mm
• Module Length: 2865mm
• Material: PVDF
• Model NO.: TC-UF120-25128
• MWCO: 120KDA
• Transport Package: Wooden Box
• Specification: TC-UF120-25128
• Trademark: RisingSun
• Origin: China
• HS Code: 84219990
• Production Capacity: 100piece/Month

Product Description

TC-UF120-25128, Tubular Membrane high flux filtration Membrane cross KOCH FEG PLUS 10-HFP-276-PVI 
 

Product Description

 

Tubular membranes are particularly suited to liquid with high viscosity or suspended solids, because their wide flow paths make them highly resistant to clogging. Tubular membranes system is an external and separated filtration system. For high solid content and viscosity liquid, we use adjustable cross-flow velocity to make the membrane run under optimal conditions and extend membrane service life. At the same time, it has more convenient cleaning, maintenance, and operation under closed pipeline. 

SUN^® Tubular membranes use a cross-flow filtration technology. The cross-flow filtration can reduce cleaning times and downtime, so as to maintain a high flow rate. Some membranes are available for back washing, if necessary, you can also use permeate or chemical cleaner for back washing, effectively extend the membranes working life.



 

Product Parameters

 

Model	A	B	C	D	E	F
TC-UF120-25128	(mm)	(ANSI)	(mm)	(mm)	(ANSI)	(mm)
	2865	1 1/4"x11-1/2 NPSM	32	107.95	1/4"-18NPT	44.5

operation specifications

Maximum Inlet Pressure:	90 psi @ 140°F (6.2 bar @ 60°C)
Minimum Outlet Pressure:	5 psi (0.3 bar)
Maximum Operating Temperature (at pH 8.0):	140°F (60°C)
Maximum Permeate Side Back Pressure:	5 psi (0.3 bar)
Maximum Feed Side Pressure Drop:	10 psi @ 140°F (0.7 bar @ 60°C)
Allowable pH - Continuous Exposure:	2.0 - 10.0 @ 140°F (60°C)
Allowable pH - Short Term Exposure:	1.5 - 10.5 @ 140°F (60°C)

 What Membrane Sheet We Have? 

  Hydrophilic membrane sheet specifications:

Parameter	Unit	Membrane Material
		PVDF		PAN	PES
Pore size/MWCO	nm/Dalton	100,000	30nm	50,000	0.1μm	100,000	50,000	10,000	5,000
Clean Water Flux	LMH, 100kpa	>800	>800	>150	>600	>350	>200	>25	>15
Operation Pressure	Kpa	-20~800			-20~800
Max.Operation Temperature	ºC	60			60
pH Range		2~12			2~12
Chloringe Exposure	ppm.h	250,000			250,000

Note: Membrane inner tube diameter is 5-25.0mm; Superior fouling resistance; Higher sustainable flux; Easier cleaning;
Strong negative pressure resistance. Maximum operating pressure up to 10bar, Working life up to more than 5 years.

Applications:
Wastewater treatment
Colloidal silica and kaolin clay or latex concentration
Ink and pigment processing
Metal finishing separations
 

Our Team