RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units

Product Details
Customization: Available
Type: Testing Equipment
Usage: Membrane Testing
Manufacturer/Factory & Trading Company
Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
90
Management System Certification
ISO9001:2015
  • RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
  • RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
  • RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
  • RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
  • RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
  • RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
Find Similar Products
  • Overview
  • FAQ
Overview

Basic Info.

Model NO.
RONU-1812
Motive Force
Pressure
Style
Spiral RO, NF, MF,UF Membrane Element
Performance
Efficient Filtration
Operation Pressure
0-40 bar
Temperature
0-45 degree
Weight
92.0 kgs
Power
220V 50Hz
Membrane
RO, NF, UF, MF
Transport Package
Wooden Box
Specification
580(mm)*350(mm)*450(mm)
Trademark
RisingSun
Origin
China
HS Code
90248
Production Capacity
5

Product Description

RONU-1812 RO, NF, UF, MF Spiral Membrane Element Testing Units
 
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
Dead end filtration:In the dead-end filtration, the solvent and solute particles smaller than the membrane pores in the pressure push through the membrane, larger than the membrane pores of the solute particles are retained, usually accumulated on the membrane surface. With the increase of time, more and more particles accumulated on the membrane surface, the permeability of the membrane will decline, then must stop to clean the membrane surface or replace the membrane.

Cross flow filtration: The filtration liquid in which the flow direction of the liquid is parallel to the membrane surface under pressure drive called cross flow filtration. The liquid flows along the membrane surface, producing shear force on the membrane surface retained material, making it partially return to the main stream, thus reducing the membrane contamination. The membrane permeation rate can also be maintained at a high level for a relatively long period of time.

Equipment structure diagram
1. 12L tank 2. Cooling water port 3. Drain valve
4. Pipe to pump 5. Pipeline filter 6. Pump outlet port
7. Pipe after out housing 8. Heat dissipation 9. Permeate outlet
10. Flow meter 11. Pressure regulating valve 12. Power switch
13. Run switch 14. Inverter control panel 15. Outlet Pressure Gauge
16. Main Part 17. Accumulator 18. Pipe before feed in housing
19. Pressure relief valve 20. Inlet Pressure Gauge 21. 1812 housing
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
Equipment schematic diagram

RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
Equipment technical parameters
Technical parameter Main value Unit Notes
Equipment model RONU-1812    
Number of membranes 1    
Membrane size 1812    
Equipment size 580(length) ×350(width) ×450(height) mm (Basic data)
Net Weight 65 Kg (Basic data)
Operating weight 80 Kg (Basic data)
Power Equipped 220V 50Hz total power ≥ 1.5KW  
High pressure pump motor power 1.5 Kw  
Maximum operating temperature range 10-55 ºC  
Maximum operating PH Range 2-12    
Maximum safety pressure 40 Bar Membrane inlet pressure
Equipment Material Pump, main body: stainless steel; piping: stainless steel + rubber + silicone; flow meter: organic glass; sealing ring: rubber
Direction of material inlet and outlet of the equipment Refer to the equipment master plan for details

Our team
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
 
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
RO, NF, UF, MF 1812 Spiral Membrane Element Testing Units
 
FAQ

1. Q: What does your company specialize in?
    A: We are a leading manufacturer of filter membrane products, based in Beijing, China, with over a decade of experience.

2. Q: What types of filter membrane products do you offer?
    A: We offer MF, UF, NF & RO membranes ; A perfect cross replacement ( Dupont, Koch, Suez, Pentair, Berghof, Rochem) in high quality but economic cost and easy cooperation; External MBR (Tubular membrane), Flat MBR, spiral MBR, DTRO, STRO devoting to landfill leachate, ZLD, high salt water etc; Tubular Anode cell & Spiral UF Membrane products for the E-coat /electrocoating/ KTL/CED/electro deposition industry.

3. Q: Can you customize membrane products?
    A: Yes, we offer OEM service.

4. Q: What is the typical lead time for order fulfillment?
    
A: Usually 2-3 weeks

5. Q: What is payment methods do you accepts?

    A: We prefer T/T.

6. Q: What kind of logistics do you have?
    A: FedEx / DHL / By air / By Sea.

7. Q: Can you supply free sample?
     A:Yes, we can supply free samples, the freight charge should be on your side.
 
8. Q: Where are your customers located?
     A: Till 2023, Our clients in 94 countries worldwide, mainly in USA, Korea, UK, France, Russia, Germany, Czech, India, Spain, Brazil etc.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier