Submerge PVDF 0.1micron Mbr Membrane Module for Industrial Waste Water Treatment/Similar Like Kobuta / Toray Membrane/ 0.8m2 Membrane Plate

• Customization: Available
• Type: Microfiltration Machine
• Method: Physical Treatment
• Model NO.: FMBR80
• Effective Membrane Area: 0.8 Square Meter Per Plate
• Membrane Material: PVDF
• Membrane Pore Size: 0.1um
• Plate Size: 1020*510*14mm
• Plate Material: ABS
• Transport Package: Pallet
• Trademark: RisingSun
• Origin: China
• HS Code: 84219990
• Production Capacity: 3000piece / Month

Product Description

Membrane bioreactor (MBR) is the combination of a membrane process like microfiltration or ultrafiltration with a biological wastewater treatment process and the activated sludge process. It is now widely used for municipal and industrial wastewater treatment. This bioreactor possesses the advantages of membrane filtration and biological treatment technology. Membrane modules, which can replace the secondary sedimentation tank, are used to separate mud and water. The MBR process has obvious advantages compared with the traditional wastewater treatment technology.

In a word, MBR technology including below two parts:
1. Biological reactor
2. Solids separation by membrane filtration

RisingSun flat sheet membrane is made of PVDF material, which has better chemical stability, fouling resistance and mechanical strength. With advanced membrane fabrication technology, we control the membrane pore size around 0.1 um to get a higher water flux and water quality.

Submerge PVDF 0.1micron MBR Membrane Module for industrial Waste Water Treatment/similar like KOBUTA / Toray membrane/ 0.8M2 membrane plate

Benefits:
The mortise and tenon structure is used in the support plate to get a more stable spacing without side panels. The support plate can be installed from top or one side without the limits of the construction site conditions.

                                                         SUN® support plate

                                   SUN® PVDF membrane electron micrograph

Flat sheet MBR element




MBR membrane plate specifications:
 

Items	Standard type
Model	FMBR80
Size (L×W×T) (mm)	1020×510×14
Membrane effective area (m^2)	0.8
Weight (kg)	1.5
Permeate flux[l /( pc·d )]	320-550
Membrane material	PVDF
Membrane pore size(μm)	0.1
Plate material	ABS
Air flow rate[l /( min·pc )]	≥ 10
pH	3-12
Output turbidity (NTU)	< 1.0
Output SS (mg/l)	≤ 5.0
Chemical cleaning	~ 5,000mg/l NaClO

Note: For different water quality, there will be a different water flow rate. So the user should fully test the membrane module. This parameter is tested at 25 ºC , -10KPa suction vacuum conditions based on municipal wastewater.


MBR complated module picture:





Cross refer: Kubota membrane, Toray membrane.

FAQ

 1, Q: Are you manufacturer?
     A:Yes, definitely,our factory locate in Beijing,China.
 
 2, Q:What's your main products ?

     A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,STRO,E-coat UF membrane, anode cell etc.
 
 3, Q: what's your main market?
     A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
 
4, Q:Can you supply free sample?
    A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
 
5, Q: What about the package?
    A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is        less than 1%.
 
6, Q: Do you offer OEM?
    A: Sure!