AE3 Anion Exchange Membrane for E-Coat System cross LANXESS

Product Details
Customization: Available
Membrane Type: Ion Exchange
Type: Ionite membrane
Still deciding? Get samples of US$ 380/Meter
Request Sample
Manufacturer/Factory & Trading Company
Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
90
Management System Certification
ISO9001:2015
  • AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
  • AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
  • AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
  • AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
  • AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
  • AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
Find Similar Products

Basic Info.

Model NO.
AE3
Functionality
Anion Exchange Membrane
Standard Width
48inch
Chemical Stability Range (pH)
1-10
Functional Group
Quaternary Ammonium
Transport Package
Carton Box
Origin
America
HS Code
39219090

Product Description

AE3 Anion Exchange Membrane cross Lanxcess
 
We supply both Anion and Cation exchange membrane for electrocoat process and water treatment industries. Nowadays, anion exchange membrane is popular used for most of CED systems, which is approved by PPG, Dupont, Valspar, Kansai and many other electrocoat paint systems. Moreover, our ion exchange membranes can be used in electro deionization systems for the production of ultra-pure water. We have three types of anion exchange membrane sheet, please see below table for the detail:
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
PRODUCTS SPECIFICATION
Ion Exchange Membrane
Model
Membrane Character Functional
Group
Exchange Capacity meq/g Replacement Reference Typical Application
Brand Model
AE1 Anion Quaternary Ammonium 1.0±0.1  MI  AMI-7001 The anode & cathode electrocoating process;
EDI, etc.
AE2 0.9  LANXESS SYBRON IONAC MA-3475
AE3 1.0  IONAC MA-7500
CE1 Cation Sulfonic Acids 1.6±0.1  MI  CMI-7000
CE2 1.4  LANXESS SYBRON IONAC MC-3470
 
 
ANION EXCHANGE FLAT SHEET MEMBRANE
Model:AE3
Physical and Chemical Properties U.S. Units   Metric Units
Functional group     quaternary amine   quaternary amine
Exchange capacity min.     meq/g 1.0
Current density  max. ampere/ft2 50 ampere/m2 538
Area resistance ohm/cm 0.1 N NaCl 30 0.1 N NaCl 30
1.0 N NaCl 10 1.0 N NaCl 10
Permeslectivity 0.5 N NaCl /1.0 N NaCl 99   99
Water permeability @5 psi max. ml / hr / ft2 50 ml / hr / m2 538
Mullen burst test min. psi 150 bar 10.3
Stability pH range   1-10   1-10
Stability max.temp °F 176  ºC 80
Dimensions max.width inches 43 meters 1.09
Dimensions max. length feet 98.4 meters 30
Dimensions approx. thickness mils 20 mm 0.51
Ionic form as shipped     Cl-   Cl-
Storability of products max.years 2 max.years 2
Storability temp range °F 40-75  ºC 4-24

  Flat Sheet Membrane Samples for Feasibility Tests
  Membrane Preparation
   This ion exchange membranes are furnished dry for ease of storage.  The membranes should remain in the shipping canister in a dry environment until ready for use.  Membranes should be prepared for service by either of the two methods listed below.

  Method A -  The membranes should be completely immersed in a solution similar in composition to the liquid contacting the membrane in process.  It is preferable that the liquid temperature be no greater than 131 °F
(55 ºC).  Allow a contact time of 3 - 4 hours.


  Method B -  As an alternative to equilibrating in the application liquor, the membrane can be immersed in water or brine solution under the same temperature and time conditions listed in Method A.

  Safety Precautions: 
 
Strong oxidants, e.g. nitric acid, can cause violent reactions when in contact with ion exchange resins.

  
Storage: 
 
It is recommended to store ion exchange resins at temperatures above the freezing point of water. Ion exchange membrane should not be stored in direct sunlight.  If the resin should become frozen, the membrane should be left to thaw out at ambient temperature before handling.  No attempt should be made to accelerate the thawing process.

Applications:
Electrodeionization for ultrapure water in EDI and SWEDI systems
Electrocoating for Cathodic paint systems
Electrolysis for Biological Fuel Cells
Electrodialysis for desalination and demineralization
Electroplating for metal recovery


 
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS



OUR TEAM
 
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
 
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS
AE3 Anion Exchange Membrane for E-Coat System cross LANXESS


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier